How to configure the device Wi-Fi connection (add Wi-Fi SSID and password)?
Use the mobile app, tap on the left menu: Motors -> Location -> Plant -> Process, tap on the Add Motor and select Configure Device.
What are the requirements for the Wi-Fi network that communicates with the SMS device? I am concerned because our company’s Wi-Fi network is restricted.
TCP/IP port 8883; for using MQTT over SSL
TCP/IP port 443; for using HTTP over SSL
There are no static IPs in SMS.
The Wi-Fi network of our company is restricted with ports blocked, can we use any cellular gateway (“hotspot”) to provide the Wi-Fi network and connection to the Cloud?
Yes, please contact your ADI representative to confirm the recommended model of cellular gateway/router.
After I configured the SMS Wi-Fi network and added the motor into the account, I cannot detect anymore the Wi-Fi network SMS00000133Z, does the SMS device work properly?
Yes, it does. During the Wi-Fi configuration of the SMS, the device itself creates a Wi-Fi network (SMS operates like an Access Point, AP mode). This Wi-Fi network’s name (SSID) has usually this format: SMS + serial number, e.g. SMS00000037Y. But this SMS Wi-Fi network only appears during 5 minutes, when the user just inserted the batteries and that the SMS cannot connect to the Internet Wi-Fi network.
After the configuration, it’s normal that the mobile app does not detect the SMS Wi-Fi network anymore since the SMS connected successfully to the plant Wi-Fi network and is not creating its own Wi-Fi network.